Features 625D available from Amundson Peterson, MN

Manufacturer John Deere
Model 625D
Type Straight line knife drive system
Length, ft. (m) 25.5-ft (7.77m)
Knife drive Base single; Optional Dual Knife (Combine use only); Base Dual Knife (SPW only or SPW/Combine combination use)
Knife speed 520 cycles/min (1040 strokes/min)
Cutterbar tilt Base Hydraulic (9 degrees tilt max)
Pickup Reel  
Number of slats 6 bat poly base; 8 bat steel optional (for forage conditions)
Fingers Nylon (steel optional typically used in rice or forage conditions)
Diameter, in. (mm) 42-in (1067mm); 54-in (1371mm) for rice or forage conditions
Height control Hydraulic
Speed control Hydraulic
Reel lift, in. (mm) 13.0-in (330mm) Cylinder stroke; 15.4-in (391.5 mm) Total Range
Reel fore and aft, in. (mm) 14.1-in (359mm) Cylinder stroke; 24.4-in (620mm) Total Range
Reel resume Base
Reel reverse Base
Operating speeds, rpm 6-54 rpm
Operating speeds, rpm (54-in. reel) 5-44 rpm
Slat Reel  
Number of slats ---
Diameter, in. (mm) ---
Height control ---
Speed control ---
Operating speeds, rpm ---
Draper Belts  
Width, in. (mm) 24-oz rubber coated polyester with V-Guide tracking; Side belts 40-in (1016mm); Center belts 55-in (1397mm); Center belt not included with SPW configuration
Clean height, in. (mm) 1-in (25.4mm)
Operating speed, ft./min. (m/min.) Side belts: Variable up to 735-ft/min (223m/min); Center belts: 695-ft/min (212m/min); Center belt not included with SPW configuration
Speed control Hydraulic from cab
Center belt reverse Base; Center belt not included with SPW configuration
Feed Drum  
Diameter, in. (mm) 16-in (406mm); Feed drum not included with SPW configuration
Feed drum fingers Steel heavy-duty round 5/8-in (16mm) diameter with breakaway notch and retainer
Number of fingers 18
Auger finger platform Dual Chevron, retracting
Finger reach, in. (mm) 6-in (152mm)
Drum/auger reverse Base
Operating speed, rpm 195 rpm
Center clean out door Base
Header Height Sensing  
Type Electro-Hydraulic Base
Header height sensing on the ground Base
Header height sensing off the ground ---
Auxiliary Top Auger  
Type Optional; hydraulic drive
Platform length, ft. (m) 27.9-ft (8.49m)
Overall operating depth, ft. (m) 7.9-ft (2.41m)
Transport width, field position, ft. (m) 26.5-ft (8.09m)
Transport width on wheel, less dividers, ft. (m) ---
Transport length, hitch extended, ft. (m) ---
Approximate weight (slat reel), lb. (kg) ---
Approximate weight (pickup reel), lb. (kg) 6359 lb (2884kg) Combine Only; 5036 lb (2284kg) SPW Only
Approximate weight (with transport) lb (kg) ---
Approximate weight (optional 54-in. reel) lb (kg) 6556 lb (2974kg) Combine Only; 5234 lb (2374kg) SPW Only